Pavement Sealers
Acrylic Coat
Asphalt & Blacktop Sealcoating
Acrylic Coat is a highly milled emulsion that utilizes the benefits of cationic binders and polymers to produce a superior sealer. It provides protection from UV rays, is easy to apply, and dries quickly. The coating is oil and fuel-resistant, binds aggregate into the surface to reduce raveling, and resists cracking and chipping. It's a flexible coating that prevents water damage and can be customized with aggregate loading.
Features
-
UV resistant
-
Easy application
-
Fast drying
-
Oil & fuel resistant
-
Binds aggregate
-
Reduces raveling
-
Resists cracking & chipping
-
Flexible coating
-
Prevents water damage
-
Environmentally safe
-
Customizable with aggregate loading
Sizes Available
5 gallon Pail - 49 lbs.
55 gallon Drum - 520 lbs.
Colors Available
Satin Black
*Colors may vary slghtly from actual product
Coverage
I'm a paragraph. Click here to add your own text and edit me. It's easy.
*Covarage rate may vary due to pavement age, porosity, and method or application
Description
Originally developed for Sky Harbor Airport in the City of Phoenix, Acrylic Coat is a blend of select mineral fibers, plasterers, and stable P.G. Grade Asphalt. It surpasses industry standards for longevity, lasting up to three times longer than most sealcoats of its kind. It meets FAA recommendations for color retention on airport pavements.
Surface Preparation
I'm a paragraph. Click here to add your own text and edit me. It's easy.
Application
Can be applied using a brush, squeegee, or conventional oil spreading equipment. Best results are achieved in dry weather conditions with temperatures above 50°F. Allow a full summer cycle before sealing new asphalt. Drying time is a maximum of 2 hours.
Important
Temperatures must be above 50°F for both application and drying period. Do not apply when rain is imminent or forecasted.
Mixing Procedures
I'm a paragraph. Click here to add your own text and edit me. It's easy.
Clean Up
Water Soluble Tar & Asphalt Remover
Physical Properties (ASTM Test Results):
ASTM
D2923-5
D562
D2923-7
D244-89
D2939-8
D93
D36
D2939-14
D2939-15
D2939-19
D2939-20
D2939-22
D2939-25
ISSA (TB-100)
G154
D95
D2939-10
D2939-13
D2939-16
Test Description
Uniformity
Vicosity, Kreb Units
Density at 25° C (77° F) b/ml (lbs/gal)
VOC Content by Volume %
Residue by Evaporation %
Flash Point ° F
Softening Point
Resistance to Heat
Resistance to Heat
Wet Flow
Direct Flame Test
Wet Film Continuity
Resistance to Kerosene
Wet Track Abrasion
Accelerated Weathering
Water Content, %
Ash Content of Residue, %
Drying Time, Firm Set
Flexibility – No flaking, Cracking or Loss of Adhesion to Sub-strait
Resutls
Pass
60 - 110 KU
8 - 9 lbs/gal
<10 g/l
30% - 50%
> 450° F
> 200° F
Pass
Pass
Pass
Pass
Pass
Pass
< 5 g/ft 2 loss
Pass
50% - 70%
12% - 20%
2 - 6 hrs
Pass
Environmental Properties (ASTM Test Results):
ASTM
PAH %
VOC %
Test Description
Polycyclic Aromatic Hydrocarbon Content
Determination of Volatile Organic- Compounds in Coatings
Resutls
<.10%
< 1% g/l