top of page

Pavement Sealers

Arctic Seal

Product Type

Arctic Seal is a unique colloid milled blend of polymerized asphalt, minerals, fiber, and proprietary reflective medium technology. This environmentally friendly coating lowers the service temperature by up to 40%, increases reflectivity, and provides a cooler surface. It is ideal for areas where extreme temperatures create hazards, such as schools, playgrounds, office complexes, and low-volume roads.

Features

  • Bonds well to sealed surfaces

  • Meets all State & Public Works specifications

  • Low VOCs (Go Green)

  • Environmentally safe

  • Dries to light gray

  • Reflective with lower glare

  • Easy to clean

Sizes Available

  • 5-gal Pail (49 lbs.)

  • 55-gal Drums (520 lbs.)

  • Bulk (9 lbs.)

Colors Available

Light Grey

Coverage

  • Smooth, Dense Pavements: min. 2.5 gal per 100 sq/ft - 23 gal per sq/yd

  • Medium Surfaces: min. 3.0 gal per 100 sq/ft - 27 gal per sq/yd

  • Rough, Aged Surfaces: min. 4.5 gal per 100 sq/ft - 40 gal per sq/yd

  • Excessively Rough Surfaces: min. 5.0 gal per 100 sq/ft - 45 gal per sq/yd

* Coverage is based on 2 coats before dilution

Description

ARCTIC SEAL is formulated as a groundbreaking cool coating designed to combat high temperatures in various environments. Its unique blend of polymerized asphalt, minerals, fiber, and proprietary reflective medium technology sets it apart as an innovative solution for surfaces exposed to extreme heat. The colloid milling process ensures a uniform mixture that provides not only a protective barrier but also a cooling effect, making it a sustainable and energy-efficient choice.

Surface Preparation

Prepare the surface by thoroughly cleaning it, removing loose materials, dirt, and debris. For sealed surfaces, ensure the seal is in good condition. Smooth excessively rough surfaces and apply primer (SSH1 mixed with two parts water) at a rate of 1 gallon per square foot on aged surfaces. Repair any cracks or imperfections with suitable materials. Create a clean, smooth substrate to facilitate optimal adhesion and penetration of ARCTIC SEAL. Consult with your Project Manager or project requirements for specific surface preparation steps based on pavement condition. A well-prepared surface ensures the effective application of ARCTIC SEAL, maximizing its cooling and reflective benefits.

Important

ARCTIC SEAL boasts a maximum drying time of 8 hours at 70°F and 50% relative humidity, allowing for efficient application and quicker return to service.

Application

  1. Ensure the area is clean and free from loose material and dirt.

  2. Apply using Spray, Squeegee, or Mechanical Equipment.

  3. Keep the surface damp while applying with a fog system.

  4. Product may be diluted with a maximum of 20% water.

  5. Priming may be necessary on aged surfaces using SSH1 and 2 parts water, applied at 1 gal per sq/ft.

  6. Do not over dilute ARCTIC SEAL. Consult your Project Manager if needed.

Mixing Procedures

When preparing ARCTIC SEAL for application, follow these mixing procedures for optimal results. Begin by ensuring the product is well-stirred before use. If the need for dilution arises, ARCTIC SEAL can be mixed with a maximum of 20% water. Exercise caution not to over-dilute the product, as this may impact its performance.

For specific projects or unique requirements, consult with your Project Manager to determine the appropriate mixing ratios tailored to the conditions of the surface and the desired application thickness.

Maintaining precise mixing procedures guarantees a uniform application, allowing ARCTIC SEAL to deliver its cooling and reflective benefits effectively.

Clean Up

Water-soluble or biodegradable solvent

SPECIFICATIONS (ASTM Test Results):

ASTM

Test Description

Min.

Resutls

Max.

D244

D217

A-1

D2042

D3910

Weight per gallon

Cone Penetration

% Non-Volatile

% Non-Volatile

Wet Track Abrasion

(Soluble in Trichloroethylene by wt)
Percentage Loss

(Mod. For Sand Seal 8 lbs. + 10 mins.)

11.0 lbs.

344 mm

60

20

11.2 lbs.

370 mm

62

30

4.6

​

1.5%

12.0 lbs.

500 mm

68

35

15.3

​

5%

WEATHERING (ASTM Test Results):

ASTM

Test Description

Resutls

D4799

D2939

D2939

D2939

QUV UV No Deterioration

Flexibility

Resistance to Heat

Resistance to Water

1,000 hr. min. / Pass

No Cracking / Pass

No Blistering / Pass

No Softening / Pass

SOLAR REFLECTANCE INDEX (ASTM Test Results):

ASTM

Test Description

Resutls

E 1980

E 1980

D 1980

Solar Reflectance

Solar Absorption

Thermal Emissivity

0.399

0.601

0.880

CONVECTIVE COEFFICIENT

Low Wind

X1

SRI Low Wind

5.000

0.594

43.000

Medium Wind

X2

SRI Medium Wind

12.000

0.587

44.300

High Wind

X3 

SRI High Wind

30.000

0.582

45.000

Pavement Sealer Price Inquiries

Pricing on Brewer Coat Pavements Sealers and Seal Coating Specialty Products Available.

bottom of page