top of page

Traffic Sealers

stay tuned! Square.png

Acrylic Traffic Paint

Brewer Cote of Arizona

This fast-drying modified latex paint has been extensively used in the Southwest by airports, contractors, and municipalities. Formulated for extreme weather conditions and high traffic, it forms a tough, durable, oil-resistant finish. It is recommended for both interior and exterior use on streets, parking lots, tennis courts, factory floors, and garages.

Features

  • Fast drying

  • Durable oil-resistant finish

  • Suitable for extreme weather conditions

  • Interior and exterior use

Sizes Available

  • 5-gallon pails

  • 55-gallon drums

Colors Available

  • White

  • Yellow

  • Blue

  • Red

  • Custom colors available upon request

Coverage

  • 20 mils wet film thickness

  • 3" Line - 300 ln/ft per gallon

  • 4" Line - 225 ln/ft per gallon

  • 5" Line - 180 ln/ft per gallon

  • 6" Line - 150 ln/ft per gallon

*Coverage will vary due to pavement porosity and thickness

Description

This acrylic traffic paint is designed to dry quickly, making it ideal for areas with high traffic and extreme weather conditions. Its durable finish is resistant to oil and can be used in various applications such as streets, parking lots, tennis courts, factory floors, and garages.

Application

  • Method of Application: Brush, roller, spray gun, and automatic striping machine

  • Drying Time: Will set in 10 minutes at 77°F and will dry in less than 30 minutes (Humidity and temperature greatly affect cure time and should be tested for trafficability before traffic resumes)

Surface Preparation

  • Surface must be clean and dry

  • All oil and grease must be removed before painting

  • Do not apply when the temperature is expected to fall below 50°F or when rain is expected

Important

  • Keep away from children, freezing temperatures, and direct sunlight

  • Keep the container closed when not in use

Mixing Procedures

  • Stir well before use

  • Apply at package consistency if using a brush or roller

  • If applied by spraying, strain and dilute up to 10% with water if needed, depending on the coverage rate required and equipment

Clean Up

Clean up with water before the paint dries, or use a suitable paint remover or biodegradable solvent

Specifications

Test

% Non-Volatiles

Weight Per gal.

Viscosity CPS

Paint PH

Water Resistance 1000 cycles

Scrub Resistance 1000 cycles

Min/Max

58% - 65%

11 lbs Min

5000 - 7500

9.00 Min

Pass

Pass

Pavement Sealer Price Inquiries

Pricing on Brewer Coat Pavements Sealers and Seal Coating Specialty Products Available.

bottom of page