top of page

Pavement Sealers

Rap Juice

Asphalt Emulsion

RAP JUICE is a unique milled asphalt emulsion combination containing clays, biodegradable solvents, and emulsifying agents. It softens and aids in mending recycled asphalt pavements. With increased viscosity, RAP JUICE binds fine surface aggregate, preventing further weathering and oxidation.

Features & Benefits

  • Milled asphalt emulsion combination

  • Contains clays, biodegradable solvents, and emulsifying agents

  • Increases viscosity to bind fine surface aggregate

  • Will not track once cured

  • Replaces asphaltenes lost to oxidation

  • Extends the service life of RAP (Recycled Asphalt Pavement)

  • Helps bind and stabilize RAP mixture

  • Penetrates, rejuvenates, and seals

  • One-coat application over rolled RAP

Sizes Available

  • 5-gallon pails (48 lbs)

  • 55-gallon drums (525 lbs)

  • Bulk transport

Colors Available

Charcoal Black


RAP JUICE is supplied ready to apply, additional dilution may be required based on the porosity of the RAP and the number of coats required to meet requirements. Consult project manager for specific recommendations:

  • Prime Coat: 0.10 - 0.13 gallons per square yard (dilution + 25% water over unrolled surface)

  • Rolled RAP 1 Coat: 0.12 - 0.15 gallons per square yard


RAP JUICE is formulated to rejuvenate and seal recycled asphalt pavements. It effectively replaces lost components due to oxidation and binds the surface aggregate, preventing further deterioration. This one-coat application product offers a convenient solution for maintaining and extending the service life of RAP.

Surface Preparation

Ensure the area is clean and free of dirt and loose aggregate before application.

Mixing Procedures

No mixing is required. RAP JUICE is supplied ready to apply. Additional dilution may be necessary based on project requirements.


Spray equipment is recommended for application. An asphalt distributor with full circulation, adjustable bar, and computerized rate control or volume measuring device is ideal. Product can be heated to 120°F if needed for cold weather applications but is not necessary. Apply over clean and prepared surfaces. Do not apply on rainy days or when the temperature is expected to drop below 45°F during the next 24 hours. RAP can be wet (no pounding water) while applying, allowing better penetration. Allow 24 hours between coats and curing. Higher application rates and the type of RAP used can increase cure time.

Clean Up

Water cleanup when wet, biodegradable solvent when dry.

Pavement Sealer Price Inquiries

Pricing on Brewer Coat Pavements Sealers and Seal Coating Specialty Products Available.

bottom of page