top of page

Pavement Sealers

Resurfacer II

Asphalt Resurfacer

Resurfacer II is a premium asphalt resurfacing solution crafted from a milled blend of fiber reinforced asphalt, selected mineral fillers, and acrylic polymer modification. Engineered to extend the life expectancy of asphalt surfaces, it offers both protection and aesthetic enhancement for parking lots, recreational areas, and driveways. Its robust formula fills pavement voids and low spots, replacing fines lost during aging. Key benefits include:

  • Extends pavement life expectancy

  • Beautifies and protects against moisture, UV rays, and oxidation

  • Superior resistance to fuel and chemicals

  • Stops raveling and fills minor cracks and depressions

  • Easy to clean, smooth flexible surface

Features

  • Fiber reinforced asphalt

  • Polymer-modified formula

  • UV protection

  • Moisture resistance

  • Chemical resistance

  • Fills pavement voids

  • Long-lasting durability

Sizes Available

  • 5-gallon pail (ship weight: 54 lbs)

  • 55-gallon drums (ship weight: 610 lbs)

  • Bulk Transport

Colors Available

Jet black finish

Coverage

  • Smooth, dense pavements: 2.0 gal per 100 sq ft

  • Medium surfaces: 3.0 gal per 100 sq ft

  • Rough, aged surfaces: 4.5 gal per 100 sq ft

  • Excessively rough surfaces: 5.0 gal per 100 sq ft (Two coats recommended on unsealed pavements, consult project manager)

Description

Resurfacer II is a specially formulated asphalt resurfacer designed to enhance and protect asphalt surfaces. Its tough, durable formula fills pavement voids and low spots, providing long-lasting protection against moisture, UV rays, and oxidation. Ideal for both old and new parking lots, recreational areas, and driveways, Resurfacer II stops raveling, fills minor cracks and depressions, and creates a smooth, flexible surface that is easy to clean.

Surface Preparation

Ensure the area is clean and free from all loose material and dirt before application.

Mixing Procedures

Squeegee or use mechanical equipment to apply the product onto the surface. Resurfacer II may be diluted with a maximum of 20% water. Priming may be necessary on aged surfaces using one-part SS-1H and four-parts water, applied at 1 gal per 100 sq/ft. Do not over-dilute Resurfacer II.

Application

Apply on clean, dry surfaces. Avoid application on rainy days or when the temperature is expected to drop below 50°F within the next 24 hours. Ensure ambient and surface temperature is at least 55°F and rising during application. Do not apply if rain is forecasted within the next 24 hours. Drying time is a maximum of 8 hours at 70°F and 50% relative humidity.

Important

Weather Limitations:

For best results, do not apply on rainy days or when the temperature is expected to drop below 50°F during the next 24 hours. On hot days, pre-dampen the pavement with a fog system. New asphalt should not be sealed until after exposed to a full summer heat cycle. Ambient and surface temperature must be at least 55°F and rising during application. Do not apply if rain is in the forecast for the next 24 hrs.

Clean Up

I'm a paragraph. Click here to add your own text and edit me. It's easy.

Specifications

Method
Test Description
Min
Max
Results
ASTM D244
Weight per gallon
10.0 lbs
10.1 lbs
ASTM D217
Cone Penetration
340 mm
701 mm
370 mm
ASTM A-1
% Non-Volatile
50%
60%
57%
ASTM D2042

% Non-Volatile

(Soluble in Trichloroethylene by wt)

20%
35%
30%
ASTM D3910

*Wet track abrasion,

(grams per sq/ft)

15.3
4.6
Precentage Loss
5%
1.5%

*Modified for Sand Seal, 8 pounds + 10 minutes

Pavement Sealer Price Inquiries

Pricing on Brewer Coat Pavements Sealers and Seal Coating Specialty Products Available.

bottom of page